NEWSCO 5" 6/7 Lobes 9.0 Stage Motor
Torque Slope
3.97 ft-lb/psi
REV / Gal
0.620 rev/gal
0.164 rev/lpm
RPM
90-190 rpm
Flow range
150-298 gpm
568-1128 lpm
Max Differential
1180 psi
8136 kPa
Max Torque
4670 ft. lbs
6332 N-m
Stall Differential
1860 psi
12824 kPa
Stall Torque
7350 lb-ft
9965 N-m
Max Weight on Bit
55000 lbs
244 kN
Weight
1400 pounds
635 kilos
Bit to Stab
26.00 in
Bit to bend
45.00 in
Slick OD
5.00 in
Wear Pad OD
5.50 in
Overall length
299.00 in
Top Connection
As Requested
Bottom Connection
3 ½" Reg
Predicted Build Rates (Degrees per 100 ft/30 m)
| Deg. | Slick | Single Stabilizer | Double Stabilizer | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Bend | Hole Size | Hole Size | Hole Size | ||||||
| Setting | 6 | 6 ¾ | 6 ⅛ | 6 | 6 ¾ | 6 ⅛ | 6 | 6 ¾ | 6 ⅛ |
| 1.50 | 8.09 | 6.96 | 7.84 | 9.09 | 9.36 | 9.12 | 8.67 | 8.93 | 8.70 |
| 1.76 | 9.74 | 8.38 | 9.45 | 10.74 | 11.06 | 10.78 | 10.32 | 10.63 | 10.36 |
| 2.00 | 11.26 | 9.69 | 10.92 | 12.26 | 12.63 | 12.31 | 11.84 | 12.20 | 11.89 |
| 2.15 | 11.26 | 9.69 | 10.92 | 12.26 | 12.63 | 12.31 | 11.84 | 12.20 | 11.89 |
| 2.25 | 12.72 | 10.94 | 12.34 | 13.72 | 14.13 | 13.78 | 13.30 | 13.70 | 13.35 |
| 2.38 | 13.93 | 11.98 | 13.51 | 14.93 | 15.37 | 14.99 | 14.51 | 14.94 | 14.57 |
| 2.50 | 14.47 | 12.44 | 14.04 | 15.43 | 15.89 | 15.49 | 15.02 | 15.47 | 15.08 |
| 2.74 | 15.96 | 13.73 | 15.48 | 16.96 | 17.47 | 17.03 | 16.54 | 17.04 | 16.61 |
| 3.00 | 17.61 | 15.15 | 17.08 | 18.61 | 19.17 | 18.68 | 18.19 | 18.74 | 18.26 |
Suggested Max RPM Straight Well Sections
| Motor Size | Bit size | 0.00 | 0.38 | 0.75 | 1.15 | 1.50 | 1.75 | 1.83 | 2.00 | 2.15 | 2.25 | 2.38 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5" | 6 ¾ | 100 | 100 | 100 | 90 | 80 | 80 | 75 | 55 | 50 | 35 | 20 |
| 5" | 6 ½ | 100 | 100 | 100 | 80 | 75 | 75 | 70 | 50 | 45 | 35 | 20 |
| 5" | 6 ¼ | 100 | 100 | 95 | 75 | 70 | 70 | 70 | 45 | 40 | 30 | 20 |
| 5" | 6 ⅛ | 90 | 95 | 90 | 65 | 65 | 65 | 65 | 40 | 30 | 20 | 20 |
| 5" | 6 | 90 | 90 | 85 | 60 | 60 | 60 | 60 | 35 | 30 |
Suggested Max RPM Well Bore Build Sections
| Motor Size | Bit size | 0.00 | 0.38 | 0.75 | 1.15 | 1.50 | 1.75 | 1.83 | 2.00 | 2.15 | 2.25 | 2.38 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5" | 6 ¾ | 70 | 70 | 50 | 50 | 40 | 40 | 40 | 40 | 30 | 30 | 20 |
| 5" | 6 ½ | 70 | 70 | 50 | 50 | 40 | 40 | 40 | 40 | 30 | 30 | 20 |
| 5" | 6 ¼ | 70 | 70 | 50 | 40 | 40 | 40 | 40 | 40 | 30 | 30 | 20 |
| 5" | 6 ⅛ | 70 | 70 | 50 | 40 | 40 | 40 | 30 | 30 | 30 | 20 | 20 |
| 5" | 6 | 70 | 70 | 50 | 40 | 40 | 30 | 30 | 20 | 20 |
*The charts above display the maximum theoretical allowable rotation for optimal hole conditions. The RPM limits above are for optimal hole
conditions and normal drilling conditions and parameters. These should be reduced further when operating with high vibration, high rotary
torque, poor hole quality, high WOB, stick slip, hard stall events and other abnormal conditions.